|
|
|
National Stock Number:
5306-01-395-1235
Federal Supply Class:
5306
National Item Identification Number:
013951235
Description:
BOLT,SHEAR
Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
| MS21296-12053 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | MS21296-12053 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.750 INCHES | | THREAD QUANTITY PER INCH | 16 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 1.293 INCHES NOMINAL | | FASTENER LENGTH | 4.606 INCHES MINIMUM AND | | 4.636 INCHES MAXIMUM | | MATERIAL | STEEL COMP H11 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-8837, TYPE II,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 51.0 ROCKWELL C MINIMUM AND | | 54.0 ROCKWELL C MAXIMUM OVERALL | | MINIMUM TENSILE STRENGTH | 103000 POUNDS PER SQUARE INCH | | HEAD STYLE | SPLINE EXTENDED WASHER | | HEAD HEIGHT | 0.590 INCHES MINIMUM AND | | 0.610 INCHES MAXIMUM | | EXTENDED WASHER DIAMETER | 1.384 INCHES MINIMUM AND | | 1.394 INCHES MAXIMUM | | EXTENDED WASHER THICKNESS | 0.098 INCHES MINIMUM AND | | 0.118 INCHES MAXIMUM | | HEAD MINOR DIAMETER | 0.797 INCHES MINIMUM AND | | 0.812 INCHES MAXIMUM | | GRIP LENGTH | 3.302 INCHES MINIMUM AND | | 3.322 INCHES MAXIMUM | | GRIP DIAMETER | 0.7480 INCHES MINIMUM AND | | 0.7490 INCHES MAXIMUM |
|
|