|
|
|
National Stock Number:
5306-01-394-7892
Federal Supply Class:
5306
National Item Identification Number:
013947892
Description:
BOLT,SHEAR
Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
| GB511GG6-19A | 06710 | VALLEY-TODECO, INC. | | GB511GG6-19A | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | PBF1479-6-19A | 27624 | SPS TECHNOLOGIES LLC | | GB511GG6-19A | 56878 | SPS TECHNOLOGIES, LLC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.375 INCHES | | THREAD QUANTITY PER INCH | 24 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.497 INCHES NOMINAL | | FASTENER LENGTH | 1.669 INCHES MINIMUM AND | | 1.716 INCHES MAXIMUM | | MATERIAL | NICKEL ALLOY 718 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | MINIMUM TENSILE STRENGTH | 17100 POUNDS PER SQUARE INCH | | HEAD STYLE | DOUBLE HEXAGON | | HEAD HEIGHT | 0.200 INCHES MINIMUM AND | | 0.220 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.553 INCHES MINIMUM AND | | 0.564 INCHES MAXIMUM | | GRIP LENGTH | 1.188 INCHES NOMINAL | | GRIP DIAMETER | 0.3740 INCHES MINIMUM AND | | 0.3745 INCHES MAXIMUM |
|
|