|
|
|
National Stock Number:
5306-01-385-9811
Federal Supply Class:
5306
National Item Identification Number:
013859811
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 03A160-4-12 | 1W025 | NORTHROP GRUMMAN SYSTEMS CORP | | 03A160-4-12 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | AIC4409-4-12 | 06725 | SPS TECHNOLOGIES, LLC | | PBF1418-4-12 | 27624 | SPS TECHNOLOGIES LLC | | HR241-4-12 | 73197 | HI-SHEAR CORPORATION | | 123740-4-12 | 80539 | SPS TECHNOLOGIES, LLC | | VCL0007-4-12 | 06710 | VALLEY-TODECO, INC. | | SC5057-4-12 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | SLB218-4-12 | 16258 | SPACE-LOK, INC. |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | THREAD QUANTITY PER INCH | 28 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.403 INCHES NOMINAL | | FASTENER LENGTH | 1.138 INCHES MINIMUM AND | | 1.168 INCHES MAXIMUM | | MATERIAL | NICKEL ALLOY 718 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH | | HEAD STYLE | FLAT COUNTERSUNK | | HEAD DIAMETER | 0.3988 INCHES NOMINAL | | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND | | 101.0 DEGREES MAXIMUM | | GRIP LENGTH | 0.740 INCHES MINIMUM AND | | 0.760 INCHES MAXIMUM | | GRIP DIAMETER | 0.2490 INCHES MINIMUM AND | | 0.2495 INCHES MAXIMUM |
|
|