5306-01-359-2293, BOLT,CLOSE TOLERANCE

National Stock Number:
5306-01-359-2293

Federal Supply Class:
5306

National Item Identification Number:
013592293

Description:
BOLT,CLOSE TOLERANCE

Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.

Manufacturer Information:

S4928913-4-15

88277

THE BOEING COMPANY

Techincal Specification:

THREAD SERIES DESIGNATOR	UNF
NOMINAL THREAD DIAMETER	0.250 INCHES
THREAD QUANTITY PER INCH	28
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.316 INCHES NOMINAL
FASTENER LENGTH	1.239 INCHES MINIMUM AND
	1.269 INCHES MAXIMUM
MATERIAL	STEEL COMP E4340 OR
	STEEL COMP 4140 OR
	STEEL COMP 8740 OR
	STEEL COMP 8735 OR
	STEEL COMP 6150 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR
	MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OR
	MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OR
	MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR
	MIL-S-8503 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
SURFACE TREATMENT	CHROMIUM BEARING SURFACE OF HEAD
	CADMIUM SIDES OF HEAD
	CHROMIUM GRIP
	CADMIUM TOP OF HEAD
	CADMIUM THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	DPS.9.84,TY 1,CAGE 88277 MFR REF SINGLE TREATMENT RESPONSE BEARING SURFACE OF HEAD
	DPS.9.74,TY 1,CAGE 88277 MFR REF SINGLE TREATMENT RESPONSE SIDES OF HEAD
	DPS.9.84,TY 1,CAGE 88277 MFR REF SINGLE TREATMENT RESPONSE GRIP
	DPS.9.74,TY 1,CAGE 88277 MFR REF SINGLE TREATMENT RESPONSE TOP OF HEAD
	DPS.9.74,TY 1,CAGE 88277 MFR REF SINGLE TREATMENT RESPONSE THREADS
HARDNESS RATING	36.0 ROCKWELL C MINIMUM AND
	40.0 ROCKWELL C MAXIMUM OVERALL
MINIMUM TENSILE STRENGTH	95000 POUNDS PER SQUARE INCH
HEAD STYLE	DISHED HEXAGON
HEAD HEIGHT	0.125 INCHES MINIMUM AND
	0.140 INCHES MAXIMUM
WIDTH BETWEEN FLATS	0.430 INCHES MINIMUM AND
	0.439 INCHES MAXIMUM
GRIP LENGTH	0.928 INCHES MINIMUM AND
	0.948 INCHES MAXIMUM
GRIP DIAMETER	0.2483 INCHES MINIMUM AND
	0.2492 INCHES MAXIMUM
SURFACE FINISH	32.0 MICROINCHES FIRST SHOULDER
	63.0 MICROINCHES BEARING SURFACE OF HEAD
	63.0 MICROINCHES GRIP
	32.0 MICROINCHES THREADS
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.128 INCHES MINIMUM AND
	1.148 INCHES MAXIMUM FIRST HOLE
SHANK UNTHREADED HOLE DIAMETER	0.076 INCHES MINIMUM AND
	0.086 INCHES MAXIMUM FIRST HOLE

Click here to Register for Free 30-day Trial