5306-01-351-5511, BOLT,SHOULDER

5905-01-351-5510 RESISTOR,VARIABLE,WIRE WOUND,PRE

National Stock Number:
5306-01-351-5511

Federal Supply Class:
5306

National Item Identification Number:
013515511

Description:
BOLT,SHOULDER

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No. 10 (0.190 IN.) (5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is not designed to be held or driven with an inserted drivers. A locking feature may be incorporated in the design of the head or threads. For items with a thread diameter smaller than No. 10 (0.190 IN.) (5 mm) and those items with an inserted drive head, use SCREW, SHOULDER. For items which are No. 10 (0.190 IN.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use BOLT, EXTERNALLY RELIEVED BODY. Excludes THUMBSCREW.

Manufacturer Information:

03A217-14DH39	1W025	NORTHROP GRUMMAN SYSTEMS CORP
03A217-14DH39	76823	NORTHROP GRUMMAN SYSTEMS CORPORATION
AIC1699-14DH39	06725	SPS TECHNOLOGIES, LLC
PBF1480-14DH39	27624	SPS TECHNOLOGIES LLC
BA0017AC3-14E39	62384	LFC INDUSTRIES INC.
124231-14DH39	80539	SPS TECHNOLOGIES, LLC
VS3364-14DH39	06950	HOWMET GLOBAL FASTENING SYSTEMS INC
VS3364-14DH39	92215	HOWMET GLOBAL FASTENING SYSTEMS INC

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	3.340 INCHES MINIMUM AND 3.390 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH	3.607 INCHES MINIMUM AND 3.637 INCHES MAXIMUM
HEAD HEIGHT	0.500 INCHES MINIMUM AND 0.515 INCHES MAXIMUM
HEAD STYLE	DISHED HEXAGON
HOLE CONFIGURATION STYLE	HEXAGON CORNERS
HOLE DIAMETER	0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
HOLE QUANTITY	3
HOLE TYPE	DRILLED
MATERIAL DOCUMENT AND CLASSIFICATION	AMS5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	IRON ALLOY 660 OVERALL
NOMINAL THREAD DIAMETER	0.875 INCHES
SHOULDER DIAMETER	0.9985 INCHES MINIMUM AND 0.9990 INCHES MAXIMUM FIRST SHOULDER
SHOULDER LENGTH	2.428 INCHES MINIMUM AND 2.448 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPE	ROUND FIRST SHOULDER
SHANK UNTHREADED HOLE DIAMETER	0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE
WIDTH BETWEEN FLATS	1.427 INCHES MINIMUM AND 1.440 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	1.184 INCHES NOMINAL
THREAD QUANTITY PER INCH	14
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)

Click here to Register for Free 30-day Trial