5306-01-350-8231, BOLT,SHEAR

National Stock Number:
5306-01-350-8231

Federal Supply Class:
5306

National Item Identification Number:
013508231

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

84725-10H38	56878	SPS TECHNOLOGIES, LLC
GB511GF10H38	26512	NORTHROP GRUMMAN SYSTEMS CORPORATION
VCC0090-10H38	06710	VALLEY-TODECO, INC.
PBF1478-10H38	27624	SPS TECHNOLOGIES LLC

Techincal Specification:

EXTENDED WASHER DIAMETER	1.040 INCHES MINIMUM AND 1.050 INCHES MAXIMUM
EXTENDED WASHER THICKNESS	0.140 INCHES MINIMUM AND 0.160 INCHES MAXIMUM
FASTENER LENGTH	3.228 INCHES MINIMUM AND 3.258 INCHES MAXIMUM
GRIP DIAMETER	0.6235 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM
GRIP LENGTH	2.365 INCHES MINIMUM AND 2.385 INCHES MAXIMUM
HEAD HEIGHT	0.608 INCHES MINIMUM AND 0.628 INCHES MAXIMUM
HEAD STYLE	DOUBLE HEXAGON W/HOLE
HOLE CONFIGURATION STYLE	DOUBLE HEXAGON LONGITUDINAL HOLE
HOLE DIAMETER	0.050 INCHES MINIMUM AND 0.060 INCHES MAXIMUM
HOLE TYPE	DRILLED
HOLE QUANTITY	1
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	NICKEL ALLOY 718 OVERALL
MINIMUM TENSILE STRENGTH	220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.625 INCHES
PART NAME ASSIGNED BY CONTROLLING AGENCY	NAVY SPECIAL PROJECT
WIDTH BETWEEN FLATS	0.679 INCHES MINIMUM AND 0.690 INCHES MAXIMUM
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.868 INCHES NOMINAL
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)
THREAD QUANTITY PER INCH	18

Click here to Register for Free 30-day Trial