|
|
|
National Stock Number:
5306-01-337-3264
Federal Supply Class:
5306
National Item Identification Number:
013373264
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| MS21297H10025 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.6250 INCHES | | THREAD QUANTITY PER INCH | 18 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 1.005 INCHES NOMINAL | | FASTENER LENGTH | 2.567 INCHES MINIMUM AND | | 2.597 INCHES MAXIMUM | | MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-8837,TYPE II,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM AND | | 50.0 ROCKWELL C MAXIMUM OVERALL | | HEAD STYLE | SPLINE EXTENDED WASHER | | HEAD HEIGHT | 0.552 INCHES MINIMUM AND | | 0.572 INCHES MAXIMUM | | EXTENDED WASHER DIAMETER | 1.153 INCHES MINIMUM AND | | 1.163 INCHES MAXIMUM | | EXTENDED WASHER THICKNESS | 0.080 INCHES MINIMUM AND | | 0.100 INCHES MAXIMUM | | HEAD MINOR DIAMETER | 0.673 INCHES MINIMUM AND | | 0.688 INCHES MAXIMUM | | HOLE CONFIGURATION STYLE | SPLINE | | HOLE TYPE | DRILLED | | HOLE QUANTITY | 4 | | HOLE DIAMETER | 0.050 INCHES MINIMUM AND | | 0.060 INCHES MAXIMUM | | GRIP LENGTH | 1.552 INCHES MINIMUM AND | | 1.572 INCHES MAXIMUM | | GRIP DIAMETER | 0.623 INCHES MINIMUM AND | | 0.624 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD | | 32.0 MICROINCHES GRIP | | SPECIAL FEATURES | HOLE DRILLED IN TOP CENTER OF HEAD-0.470/0.519 IN DIA X 0.180 IN NOM DEEP | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 96906 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MS21297H10025 |
|
|