5306-01-332-7201, BOLT,SHEAR

National Stock Number:
5306-01-332-7201

Federal Supply Class:
5306

National Item Identification Number:
013327201

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

5306PL1741085	9009H	INSPEKTORAT WSPARCIA SIL ZBROJNYCH
MS21250-09012	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

EXTENDED WASHER DIAMETER	0.928 INCHES MINIMUM AND 0.938 INCHES MAXIMUM
EXTENDED WASHER THICKNESS	0.123 INCHES MINIMUM AND 0.143 INCHES MAXIMUM
FASTENER LENGTH	1.612 INCHES MINIMUM AND 1.632 INCHES MAXIMUM
GRIP DIAMETER	0.5605 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM
GRIP LENGTH	0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM
HARDNESS RATING	39.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.547 INCHES MINIMUM AND 0.567 INCHES MAXIMUM
HEAD STYLE	DOUBLE HEXAGON EXTENDED WASHER
MATERIAL	STEEL COMP 4140 OR STEEL COMP E4340 OR STEEL COMP 8740 OR STEEL COMP 6150 OVERALL
MINIMUM TENSILE STRENGTH	180000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.562 INCHES
SPECIAL FEATURES	CHAMFER ON THREAD END AT 60 DEG ANGLE
WIDTH BETWEEN FLATS	0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.852 INCHES MINIMUM AND 0.892 INCHES MAXIMUM
THREAD QUANTITY PER INCH	18
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)

Click here to Register for Free 30-day Trial