5306-01-331-0469, BOLT,SHEAR

5306-01-331-0468 BOLT,EXTERNALLY RELIEVED BODY

National Stock Number:
5306-01-331-0469

Federal Supply Class:
5306

National Item Identification Number:
013310469

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

84725-6-104D	56878	SPS TECHNOLOGIES, LLC
GB511GF6-104D	26512	NORTHROP GRUMMAN SYSTEMS CORPORATION
VCC0090-6-104D	06710	VALLEY-TODECO, INC.
PBF1478-6-104D	27624	SPS TECHNOLOGIES LLC

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	0.220 INCHES NOMINAL FIRST HOLE
EXTENDED WASHER DIAMETER	0.639 INCHES MINIMUM AND 0.649 INCHES MAXIMUM
EXTENDED WASHER THICKNESS	0.091 INCHES NOMINAL
FASTENER LENGTH	6.795 INCHES MINIMUM AND 6.825 INCHES MAXIMUM
GRIP DIAMETER	0.3740 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM
GRIP LENGTH	6.240 INCHES MINIMUM AND 6.260 INCHES MAXIMUM
HEAD HEIGHT	0.250 INCHES MINIMUM AND 0.290 INCHES MAXIMUM
HEAD STYLE	DOUBLE HEXAGON W/HOLE
MATERIAL DOCUMENT AND CLASSIFICATION	AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	NICKEL ALLOY 718 OVERALL
MINIMUM TENSILE STRENGTH	220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.375 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.101 INCHES MINIMUM AND 0.111 INCHES MAXIMUM FIRST HOLE
WIDTH BETWEEN FLATS	0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.560 INCHES NOMINAL
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)
THREAD QUANTITY PER INCH	24

Click here to Register for Free 30-day Trial