5306-01-330-0448, BOLT,SHEAR

National Stock Number:
5306-01-330-0448

Federal Supply Class:
5306

National Item Identification Number:
013300448

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

NAS2818C18D

80205

NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH	1.638 INCHES MINIMUM AND 1.668 INCHES MAXIMUM
GRIP DIAMETER	0.4985 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM
GRIP LENGTH	1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM
HEAD HEIGHT	0.250 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
HEAD STYLE	DISHED HEXAGON
MATERIAL	STEEL CORROSION RESISTING OVERALL
MINIMUM TENSILE STRENGTH	17100 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.500 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.106 INCHES MINIMUM AND 0.116 INCHES MAXIMUM FIRST HOLE
SPECIFICATION/STANDARD DATA	80205-NAS2818 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
WIDTH BETWEEN FLATS	0.741 INCHES MINIMUM AND 0.752 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.518 INCHES MINIMUM AND 0.538 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)
THREAD QUANTITY PER INCH	20

Click here to Register for Free 30-day Trial