5905-01-324-9463 RESISTOR,VARIABLE,NONWIRE WOUND, Index 5305-01-324-9465 SCREW,CAP,SOCKET HEAD

National Stock Number:
5306-01-324-9464

Federal Supply Class:
5306

National Item Identification Number:
013249464

Description:
BOLT,SHOULDER

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No. 10 (0.190 IN.) (5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is not designed to be held or driven with an inserted drivers. A locking feature may be incorporated in the design of the head or threads. For items with a thread diameter smaller than No. 10 (0.190 IN.) (5 mm) and those items with an inserted drive head, use SCREW, SHOULDER. For items which are No. 10 (0.190 IN.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use BOLT, EXTERNALLY RELIEVED BODY. Excludes THUMBSCREW.


Manufacturer Information:
NAS1297-3D2180205NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER1.491 INCHES MINIMUM AND 1.541 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH1.664 INCHES MINIMUM AND 1.704 INCHES MAXIMUM
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MINIMUM OVERALL
HEAD HEIGHT0.140 INCHES MINIMUM AND 0.172 INCHES MAXIMUM
HEAD STYLEHEXAGON
MATERIALSTEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8630 OR STEEL COMP 8735 OR STEEL COMP 4130 OR STEEL COMP 4037 OVERALL
MINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.190 INCHES
SHOULDER DIAMETER0.246 INCHES MINIMUM AND 0.249 INCHES MAXIMUM ALL SHOULDERS
SHOULDER LENGTH1.312 INCHES MINIMUM AND 1.332 INCHES MAXIMUM ALL SHOULDERS
SHOULDER SHAPEROUND ALL SHOULDERS
SHANK UNTHREADED HOLE DIAMETER0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE
SPECIFICATION/STANDARD DATA80205-NAS1297 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
WIDTH BETWEEN FLATS0.428 INCHES MINIMUM AND 0.440 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.362 INCHES NOMINAL
THREAD QUANTITY PER INCH32
THREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF)


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us