|
|
|
National Stock Number:
5306-01-315-3787
Federal Supply Class:
5306
National Item Identification Number:
013153787
Description:
BOLT,EXTERNALLY RELIEVED BODY
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, and whose unthreaded portion has been machined or ground in one or more places or over its entire length to a maximum diameter less than the minimum pitch diameter of the thread (excludes undercuts for thread relief). It is No. 10 (0.190 IN.) (5 mm) or larger in size and has a head which is not designed to be held or driven with an inserted driver or designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, INTERNAL WRENCHING and THUMBSCREW. See also SCREW, EXTERNALLY RELIEVED BODY.
|
Manufacturer Information:
| 5306PL1499157 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | MS9697-22 | 0U583 | SAE INTERNATIONAL | | ST2601-22 | 77445 | RTX CORPORATION | | MS9697-22 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | MS9697-22 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | THREAD QUANTITY PER INCH | 28 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.740 INCHES MINIMUM AND | | 0.891 INCHES MAXIMUM | | FASTENER LENGTH | 1.490 INCHES MINIMUM AND | | 1.510 INCHES MAXIMUM | | MATERIAL | NICKEL ALLOY OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | PWA 96 CAGEC 77445 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | HEAD STYLE | DOUBLE HEXAGON W/HOLE | | HEAD HEIGHT | 0.293 INCHES MINIMUM AND | | 0.313 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.312 INCHES NOMINAL | | EXTENDED WASHER DIAMETER | 0.428 INCHES MINIMUM AND | | 0.448 INCHES MAXIMUM | | EXTENDED WASHER THICKNESS | 0.060 INCHES MINIMUM | | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 | | FIRST DIAMETER FROM HEAD | 0.222 INCHES MINIMUM AND | | 0.232 INCHES MAXIMUM | | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.619 INCHES MINIMUM AND | | 0.750 INCHES MAXIMUM | | SPECIAL FEATURES | 32 MICRO INCHES ON GRIP AND BEARING SURFACE OF HEAD; HEAT TREATED PER PWA 586-3 ON CHAMFERED POINT AND CHAMFER TOP OF THEADS |
|