5306-01-308-1442, BOLT,SHEAR

National Stock Number:
5306-01-308-1442

Federal Supply Class:
5306

National Item Identification Number:
013081442

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

NAS6603L36

80205

NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE

Techincal Specification:

FASTENER LENGTH	2.580 INCHES MINIMUM AND 2.610 INCHES MAXIMUM
GRIP DIAMETER	0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH	2.240 INCHES MINIMUM AND 2.260 INCHES MAXIMUM
HEAD HEIGHT	0.095 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
HEAD STYLE	DISHED HEXAGON
LOCKING FEATURE	PATCH OR STRIP OR PELLET THREADS
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE FASTENER
MATERIAL	PLASTIC POLYAMIDE NYLON LOCKING FEATURE
MATERIAL	STEEL COMP E4340 OR STEEL COMP 8740 FASTENER
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.190 INCHES
SPECIFICATION/STANDARD DATA	80205-NAS6603 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
WIDTH BETWEEN FLATS	0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
SURFACE TREATMENT	CADMIUM AND CHROMATE FASTENER
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.345 INCHES NOMINAL
THREAD QUANTITY PER INCH	32
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)

Click here to Register for Free 30-day Trial