5306-01-304-7904, BOLT,SHEAR

National Stock Number:
5306-01-304-7904

Federal Supply Class:
5306

National Item Identification Number:
013047904

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

NAS6403AP4H

80205

NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE

Techincal Specification:

FASTENER LENGTH	0.558 INCHES MINIMUM AND 0.588 INCHES MAXIMUM
GRIP DIAMETER	0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
GRIP LENGTH	0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD HEIGHT	0.110 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD STYLE	DISHED HEXAGON
HOLE CONFIGURATION STYLE	HEXAGON CORNERS
HOLE DIAMETER	0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM
HOLE QUANTITY	3
HOLE TYPE	DRILLED
LOCKING FEATURE	PATCH THREADS
MATERIAL DOCUMENT AND CLASSIFICATION	AMS4928 ASSN STD SINGLE MATERIAL RESPONSE OR AMS4967 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
MATERIAL	PLASTIC POLYAMIDE NYLON LOCKING FEATURE
MATERIAL	TITANIUM ALLOY UNS R56400 FASTENER
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.190 INCHES
SPECIFICATION/STANDARD DATA	80205-NAS6403 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
WIDTH BETWEEN FLATS	0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE FINISH	32.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	NAS4006 ASSN STD SINGLE TREATMENT RESPONSE FASTENER
SURFACE TREATMENT	ALUMINUM FASTENER
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.298 INCHES MINIMUM AND 0.348 INCHES MAXIMUM
THREAD QUANTITY PER INCH	32
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)

Click here to Register for Free 30-day Trial