|
|
|
National Stock Number:
5306-01-266-9831
Federal Supply Class:
5306
National Item Identification Number:
012669831
Description:
BOLT,MACHINE
Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.
|
Manufacturer Information:
| 5306PL1498744 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | ST2150-020 | 52661 | RTX CORPORATION | | ST2150-020 | 77445 | RTX CORPORATION |
|
Techincal Specification:
| THREAD QUANTITY PER INCH | 28 | | THREAD CLASS | 3A | | HEAD HEIGHT | 0.233 INCHES MINIMUM AND | | 0.253 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.312 INCHES NOMINAL | | EXTENDED WASHER DIAMETER | 0.428 INCHES MINIMUM AND | | 0.448 INCHES MAXIMUM | | EXTENDED WASHER THICKNESS | 0.060 INCHES MINIMUM | | HOLE CONFIGURATION STYLE | DOUBLE HEXAGON LONGITUDINAL HOLE | | HOLE TYPE | DRILLED | | HOLE QUANTITY | 4 | | HOLE DIAMETER | 0.060 INCHES MINIMUM AND | | 0.070 INCHES MAXIMUM | | GRIP LENGTH | 0.025 INCHES MINIMUM AND | | 0.099 INCHES MAXIMUM | | FEATURES PROVIDED | FINISHED HEAD | | SPECIAL FEATURES | FAILURE OF THIS ITEM COULD RESULT IN LOSS OR SUBSTANTIAL DAMAGE TO THE AIR VEHICLE OR WEAPONS SYSTEM, OR DEATH OR SERIOUS INJURY TO PERSONNEL | | CRITICALITY CODE JUSTIFICATION | FEAT AND | | AGAV | | THREAD DIRECTION | RIGHT-HAND | | FASTENER LENGTH | 0.615 INCHES MINIMUM AND | | 0.635 INCHES MAXIMUM | | MATERIAL | STEEL CORROSION RESISTING OVERALL | | THREAD LENGTH | 0.516 INCHES MINIMUM AND | | 0.610 INCHES MAXIMUM | | HEAD STYLE | DOUBLE HEXAGON W/HOLE | | THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.250 INCHES |
|
|