|
|
|
National Stock Number:
5306-01-222-9079
Federal Supply Class:
5306
National Item Identification Number:
012229079
Description:
BOLT,SHEAR
Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
| 54315-000 | U7887 | NP AEROSPACE LIMITED | | BACB30ST10-65 | 16258 | SPACE-LOK, INC. | | BACB30ST10-65 | 29372 | HOWMET GLOBAL FASTENING SYSTEMS INC. | | BACB30ST10-65 | 56878 | SPS TECHNOLOGIES, LLC | | BACB30ST10-65 | 80539 | SPS TECHNOLOGIES, LLC | | BACB30ST10-65 | 81205 | THE BOEING COMPANY | | BACB30ST10-65 | 84256 | AVIBANK MFG., INC. |
|
Techincal Specification:
| FASTENER LENGTH | 5.166 INCHES MINIMUM AND 5.196 INCHES MAXIMUM | | GRIP DIAMETER | 0.6233 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM | | GRIP LENGTH | 4.052 INCHES MINIMUM AND 4.072 INCHES MAXIMUM | | HEAD HEIGHT | 0.312 INCHES MINIMUM AND 0.327 INCHES MAXIMUM | | HEAD STYLE | DISHED HEXAGON | | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.625 INCHES | | SPECIAL FEATURES | ASSEMBLY AREA EXTENDED AT THREADED END,0.532 MIN. AND 0.542 MAX. LENGTH 0.549 MIN. AND 0.552 MAX. DIAMETER; ASSEMBLY CONTAINS RETAINER PAWL,MATERIAL CRES PER AMS 5643,ROCKWELL HARDNESS 35.0 MIN. AND 39.0 MAX.,FINISH BLAST PER BAC 5951,PASSIVATE PER QQ-P-35,DRY FILM LUBE PER MIL-L-8937; SPRING,MATERIAL CRES PER AMS 5673,ROCKWELL HARDNESS 48.0 MIN. FINISH PASSIVATE PER QQ-P-35; PIN AND PLUGS,MATERIAL 303 CRES PER ASTM A 582,FINISH PASSIVATE PER QQ-P-35 | | WIDTH BETWEEN FLATS | 0.928 INCHES MINIMUM AND 0.940 INCHES MAXIMUM | | SURFACE TREATMENT | CADMIUM AND CHROMATE FASTENER | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.582 INCHES NOMINAL | | THREAD QUANTITY PER INCH | 18 | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
|
|