5306-01-214-5044 BOLT,INTERNALLY RELIEVED BODY Index 5306-01-214-5046 BOLT,SHEAR

National Stock Number:
5306-01-214-5045

Federal Supply Class:
5306

National Item Identification Number:
012145045

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.


Manufacturer Information:
79894D6-4856878SPS TECHNOLOGIES, LLC
AIC558-6D4806725SPS TECHNOLOGIES, LLC
BM17035-6-4817446HUCK INTERNATIONAL, INC
H408F6D4817446HUCK INTERNATIONAL, INC
GB511EB6D4826512NORTHROP GRUMMAN SYSTEMS CORPORATION
BM17035-6-4897928HUCK INTL INC
VCD0004-6-S-4806710VALLEY-TODECO, INC.
PBF1290-6D4827624SPS TECHNOLOGIES LLC
VS3244F-6D4892215HOWMET GLOBAL FASTENING SYSTEMS INC
H408F6D4897928HUCK INTL INC


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER3.320 INCHES MINIMUM AND 3.342 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH3.481 INCHES MINIMUM AND 3.528 INCHES MAXIMUM
GRIP DIAMETER0.3733 INCHES MINIMUM AND 0.3742 INCHES MAXIMUM
GRIP LENGTH2.990 INCHES MINIMUM AND 3.010 INCHES MAXIMUM
HARDNESS RATING46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT0.200 INCHES MINIMUM AND 0.220 INCHES MAXIMUM
HEAD STYLEDOUBLE HEXAGON
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP H11 OVERALL
III PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT
PROPRIETARY CHARACTERISTICSMRCS
MINIMUM TENSILE STRENGTH220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.375 INCHES
SHANK UNTHREADED HOLE DIAMETER0.101 INCHES MINIMUM AND 0.111 INCHES MAXIMUM FIRST HOLE
WIDTH BETWEEN FLATS0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM
SURFACE FINISH32.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONNAS 672 ASSN STD 1ST TREATMENT RESPONSE OR MIL-C-8837 TY 2 CLASS 2 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OR CADMIUM AND CHROMATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.471 INCHES MINIMUM AND 0.538 INCHES MAXIMUM
THREAD QUANTITY PER INCH24
THREAD SERIES DESIGNATORUNJF


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us