5306-01-204-3303, BOLT,SHEAR

National Stock Number:
5306-01-204-3303

Federal Supply Class:
5306

National Item Identification Number:
012043303

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

SWM10-10-20	73197	HI-SHEAR CORPORATION
SWM10-10-20	C4293	ALCOA FASTENING SYSTEMS FAIRCHILDFASTENERS EUROPE - VSD GMBH
SWM10-10-20	L4528	LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC

Techincal Specification:

THREAD SERIES DESIGNATOR	ISO S
NOMINAL THREAD DIAMETER	10.0 MILLIMETERS
THREAD PITCH IN MILLIMETERS	1.5
EXTERNAL THREAD TOLERANCE CLASS	M10X1.5-4H6H
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	19.25 MILLIMETERS NOMINAL
FASTENER LENGTH	39.25 MILLIMETERS NOMINAL
MATERIAL	STEEL OVERALL
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE OR
	MIL-S-6049 MIL SPEC SINGLE MATERIAL RESPONSE OR
	MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE II,CLASS 2 FED SPEC ALL TREATMENT RESPONSES OVERALL
HEAD STYLE	SPLINE EXTENDED WASHER
WIDTH BETWEEN FLATS	16.25 MILLIMETERS MINIMUM AND
	16.75 MILLIMETERS MAXIMUM
EXTENDED WASHER DIAMETER	16.25 MILLIMETERS MINIMUM AND
	16.75 MILLIMETERS MAXIMUM
GRIP LENGTH	19.25 MILLIMETERS MINIMUM AND
	20.00 MILLIMETERS MAXIMUM
GRIP DIAMETER	9.9620 MILLIMETERS MINIMUM AND
	9.9870 MILLIMETERS MAXIMUM
SURFACE FINISH	32.0 MICROINCHES OVERALL
SPECIFICATION/STANDARD DATA	73197-SWM10-10-20 MANUFACTURERS STANDARD

Click here to Register for Free 30-day Trial