5306-01-181-0802, BOLT,SHEAR

National Stock Number:
5306-01-181-0802

Federal Supply Class:
5306

National Item Identification Number:
011810802

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

MS14163-09048

96906

MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

EXTENDED WASHER DIAMETER	0.928 INCHES MINIMUM AND 0.938 INCHES MAXIMUM
EXTENDED WASHER THICKNESS	0.102 INCHES MINIMUM AND 0.122 INCHES MAXIMUM
FASTENER LENGTH	4.010 INCHES MINIMUM AND 4.040 INCHES MAXIMUM
GRIP DIAMETER	0.5605 INCHES MINIMUM AND 0.5615 INCHES MAXIMUM
GRIP LENGTH	2.990 INCHES MINIMUM AND 3.010 INCHES MAXIMUM
HARDNESS RATING	46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.373 INCHES MINIMUM AND 0.413 INCHES MAXIMUM
HEAD MINOR DIAMETER	0.610 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
HEAD STYLE	SPLINE EXTENDED WASHER
MATERIAL DOCUMENT AND CLASSIFICATION	AMS6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP H11 OVERALL
MINIMUM TENSILE STRENGTH	220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.562 INCHES
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-C-8837,TY,2,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	1.000 INCHES MINIMUM AND 1.050 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)
THREAD QUANTITY PER INCH	18

Click here to Register for Free 30-day Trial