5306-01-165-3285 BOLT,SHEAR Index 5306-01-165-3287 BOLT,SHEAR

National Stock Number:
5306-01-165-3286

Federal Supply Class:
5306

National Item Identification Number:
011653286

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.


Manufacturer Information:
10116050A486GNIMIKKEISTOKESKUS NCB FINLAND
122897-5D1480539SPS TECHNOLOGIES, LLC
AIC763-5D1406725SPS TECHNOLOGIES, LLC
GS1032-5D141EM77B & B SPECIALTIES INC
MB156-5D1473197HI-SHEAR CORPORATION
MB156-5D14L4528LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC
VFK600-5D1406710VALLEY-TODECO, INC.
VS3190-5D1406950HOWMET GLOBAL FASTENING SYSTEMS INC
S343-5D1417446HUCK INTERNATIONAL, INC
PBF1267-5D1427624SPS TECHNOLOGIES LLC
ST3M753-5D1476301THE BOEING COMPANY
ST3M753-5D1492215HOWMET GLOBAL FASTENING SYSTEMS INC
VS3190-5D1492215HOWMET GLOBAL FASTENING SYSTEMS INC
S343-5D1497928HUCK INTL INC


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER1.203 INCHES MINIMUM AND 1.243 INCHES MAXIMUM FIRST HOLE
EXTENDED WASHER DIAMETER0.575 INCHES MINIMUM AND 0.585 INCHES MAXIMUM
EXTENDED WASHER THICKNESS0.035 INCHES MINIMUM AND 0.055 INCHES MAXIMUM
FASTENER LENGTH1.411 INCHES MINIMUM AND 1.441 INCHES MAXIMUM
GRIP LENGTH0.865 INCHES MINIMUM AND 0.885 INCHES MAXIMUM
GRIP DIAMETER0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
HEAD HEIGHT0.247 INCHES MINIMUM AND 0.287 INCHES MAXIMUM
HEAD MINOR DIAMETER0.383 INCHES MINIMUM AND 0.389 INCHES MAXIMUM
HEAD STYLESPLINE EXTENDED WASHER
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP XM-13 OVERALL
MINIMUM TENSILE STRENGTH220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.312 INCHES
SHANK UNTHREADED HOLE DIAMETER0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.526 INCHES MINIMUM AND 0.576 INCHES MAXIMUM
THREAD QUANTITY PER INCH24
THREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF)


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us