|
|
|
National Stock Number:
5306-01-146-8161
Federal Supply Class:
5306
National Item Identification Number:
011468161
Description:
BOLT,ECCENTRIC HEAD
Detail:
AN EXTERNALLY THREADED FASTENER THE HEAD OF WHICH IS USUALLY FLAT WITH A PERIPHERY NOT CONCENTRIC TO THE BOLT SHANK. THE HEAD IS NOT DESIGNED FOR WRENCHING. IT MAY HAVE A DRIVE FEATURE LOCATED AT THE THREADED END, WHICH CAN BE USED TO ROTATE THE SCREW AND ECCENTRIC HEAD INTO A LOCKING POSITION TO SECURE A FLANGED OR GROOVE COMPONENT.
|
Manufacturer Information:
| 65102-11527-103 | 0UCY9 | M.S. AEROSPACE INC. | | 65102-11527-103 | 78286 | SIKORSKY AIRCRAFT CORPORATION |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.875 INCHES | | THREAD QUANTITY PER INCH | 14 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | FASTENER LENGTH | 2.750 INCHES NOMINAL | | MATERIAL | STEEL COMP 4340 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,CLASS 2,TYPE 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 39.0 ROCKWELL C MINIMUM AND | | 43.0 ROCKWELL C MAXIMUM OVERALL | | MINIMUM TENSILE STRENGTH | 180000 POUNDS PER SQUARE INCH | | HEAD DIAMETER | 1.250 INCHES NOMINAL | | HEAD HEIGHT | 0.375 INCHES NOMINAL | | WIDTH BETWEEN FLATS | 1.052 INCHES MINIMUM AND | | 1.064 INCHES MAXIMUM | | DISTANCE FROM CENTER OF HEAD TO CENTER OF SHANK | 1.563 INCHES NOMINAL | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 0UCY9 | | DESIGN CONTROL REFERENCE | 65102-11527-103 |
|
|