5306-01-143-2809 BOLT,SHOULDER Index 5306-01-143-2811 BOLT,SHOULDER

National Stock Number:
5306-01-143-2810

Federal Supply Class:
5306

National Item Identification Number:
011432810

Description:
BOLT,SHOULDER

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No. 10 (0.190 IN.) (5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is not designed to be held or driven with an inserted drivers. A locking feature may be incorporated in the design of the head or threads. For items with a thread diameter smaller than No. 10 (0.190 IN.) (5 mm) and those items with an inserted drive head, use SCREW, SHOULDER. For items which are No. 10 (0.190 IN.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use BOLT, EXTERNALLY RELIEVED BODY. Excludes THUMBSCREW.


Manufacturer Information:
122914-3D1080539SPS TECHNOLOGIES, LLC
MB159-3D1073197HI-SHEAR CORPORATION
PBF1269-3D1027624SPS TECHNOLOGIES LLC
ST3M837-3D1076301THE BOEING COMPANY
ST3M837-3D1092215HOWMET GLOBAL FASTENING SYSTEMS INC
MB159-3D10L4528LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC
VS3191-3D10X06950HOWMET GLOBAL FASTENING SYSTEMS INC
VS3191-3D10X92215HOWMET GLOBAL FASTENING SYSTEMS INC


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER0.819 INCHES MINIMUM AND 0.876 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH0.940 INCHES MINIMUM AND 0.987 INCHES MAXIMUM
HEAD HEIGHT0.130 INCHES MINIMUM AND 0.150 INCHES MAXIMUM
HEAD MINOR DIAMETER0.383 INCHES MINIMUM AND 0.389 INCHES MAXIMUM
HEAD STYLESPLINE DRIVE SHEAR HEAD
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP XM-13 OVERALL
NOMINAL THREAD DIAMETER0.190 INCHES
SHOULDER DIAMETER0.2021 INCHES MINIMUM AND 0.2026 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPEROUND FIRST SHOULDER
SHOULDER LENGTH0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM FIRST SHOULDER
SHANK UNTHREADED HOLE DIAMETER0.070 INCHES MINIMUM AND 0.075 INCHES MAXIMUM FIRST HOLE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTPASSIVATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.305 INCHES MINIMUM AND 0.372 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF)
THREAD QUANTITY PER INCH32


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us