5306-01-138-6283, BOLT,MACHINE

5905-01-138-6282 RESISTOR,VARIABLE,NONWIRE WOUND,

National Stock Number:
5306-01-138-6283

Federal Supply Class:
5306

National Item Identification Number:
011386283

Description:
BOLT,MACHINE

Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.

Manufacturer Information:

MS9685-08

96906

MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

FASTENER LENGTH	0.615 INCHES MINIMUM AND 0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM0.635 INCHES MAXIMUM
FEATURES PROVIDED	FINISHED HEADFINISHED HEAD
GRIP LENGTH	0.072 INCHES MINIMUM AND 0.072 INCHES MINIMUM AND 0.092 INCHES MAXIMUM0.092 INCHES MAXIMUM
HARDNESS RATING	42.0 ROCKWELL C MINIMUM AND 42.0 ROCKWELL C MINIMUM AND 46.0 ROCKWELL C MAXIMUM OVERALL46.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.134 INCHES MINIMUM AND 0.134 INCHES MINIMUM AND 0.150 INCHES MAXIMUM0.150 INCHES MAXIMUM
HEAD STYLE	HEXAGONHEXAGON
HOLE CONFIGURATION STYLE	HEXAGON FLATSHEXAGON FLATS
HOLE DIAMETER	0.042 INCHES MINIMUM AND 0.042 INCHES MINIMUM AND 0.052 INCHES MAXIMUM0.052 INCHES MAXIMUM
HOLE QUANTITY	11
HOLE TYPE	DRILLEDDRILLED
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6304 ASSN STD SINGLE MATERIAL RESPONSE OVERALLAMS 6304 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 601 OVERALL
NOMINAL THREAD DIAMETER	0.190 INCHES0.190 INCHES
WIDTH BETWEEN FLATS	0.367 INCHES MINIMUM AND 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM0.376 INCHES MAXIMUM
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	32.0 MICROINCHES GRIP32.0 MICROINCHES GRIP
SURFACE FINISH	32.0 MICROINCHES THREADS32.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	AMS 2416 ASSN STD SINGLE TREATMENT RESPONSE OVERALLAMS 2416 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	NICKEL AND NICKEL AND CADMIUM OVERALLCADMIUM OVERALL
THREAD CLASS	3A3A
THREAD DIRECTION	RIGHT-HANDRIGHT-HAND
THREAD LENGTH	0.523 INCHES MINIMUM AND 0.523 INCHES MINIMUM AND 0.563 INCHES MAXIMUM0.563 INCHES MAXIMUM
THREAD QUANTITY PER INCH	3232
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)UNIFIED NATIONAL JOINT FINE (UNJF)

Click here to Register for Free 30-day Trial