5905-01-134-8717 RESISTOR,FIXED,WIRE WOUND,INDUCT Index 5305-01-134-8719 SCREW,MACHINE

National Stock Number:
5306-01-134-8718

Federal Supply Class:
5306

National Item Identification Number:
011348718

Description:
BOLT,MACHINE

Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.


Manufacturer Information:
MS9169-100U583SAE INTERNATIONAL
MS9169-1081343SOCIETY OF AUTOMOTIVE ENGINEERS INC
SAE AS9169A81343SOCIETY OF AUTOMOTIVE ENGINEERS INC
MS9169-1096906MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
EXTENDED WASHER DIAMETER0.365 INCHES MINIMUM AND 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM0.385 INCHES MAXIMUM
EXTENDED WASHER THICKNESS0.040 INCHES MINIMUM AND 0.040 INCHES MINIMUM AND 0.050 INCHES MAXIMUM0.050 INCHES MAXIMUM
FASTENER LENGTH0.740 INCHES MINIMUM AND 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM0.760 INCHES MAXIMUM
FEATURES PROVIDEDFINISHED HEADFINISHED HEAD
GRIP LENGTH0.065 INCHES MINIMUM AND 0.065 INCHES MINIMUM AND 0.125 INCHES MAXIMUM0.125 INCHES MAXIMUM
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL32.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT0.250 INCHES MINIMUM AND 0.250 INCHES MINIMUM AND 0.270 INCHES MAXIMUM0.270 INCHES MAXIMUM
HEAD STYLEDOUBLE HEXAGON W/HOLEDOUBLE HEXAGON W/HOLE
HOLE CONFIGURATION STYLEDOUBLE HEXAGON LONGITUDINAL HOLEDOUBLE HEXAGON LONGITUDINAL HOLE
HOLE DIAMETER0.037 INCHES MINIMUM AND 0.037 INCHES MINIMUM AND 0.057 INCHES MAXIMUM0.057 INCHES MAXIMUM
HOLE QUANTITY44
HOLE TYPEDRILLEDDRILLED
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6322 ASSN STD SINGLE MATERIAL RESPONSE OVERALLAMS 6322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 8740 OVERALL
MINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.190 INCHES0.190 INCHES
SPECIAL FEATURESCOLOR BLACKCOLOR BLACK
WIDTH BETWEEN FLATS0.243 INCHES MINIMUM AND 0.243 INCHES MINIMUM AND 0.251 INCHES MAXIMUM0.251 INCHES MAXIMUM
SURFACE FINISH32.0 MICROINCHES BEARING SURFACE OF HEAD32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH32.0 MICROINCHES GRIP32.0 MICROINCHES GRIP
SURFACE FINISH32.0 MICROINCHES THREADS32.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONAMS 2485 ASSN STD SINGLE TREATMENT RESPONSE OVERALLAMS 2485 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTOXIDE OVERALLOXIDE OVERALL
THREAD CLASS3A3A
THREAD DIRECTIONRIGHT-HANDRIGHT-HAND
THREAD LENGTH0.615 INCHES MINIMUM AND 0.615 INCHES MINIMUM AND 0.695 INCHES MAXIMUM0.695 INCHES MAXIMUM
THREAD QUANTITY PER INCH3232
THREAD SERIES DESIGNATORUNFUNF


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us