|
|
|
National Stock Number:
5306-01-130-9881
Federal Supply Class:
5306
National Item Identification Number:
011309881
Description:
BOLT,ECCENTRIC HEAD
Detail:
AN EXTERNALLY THREADED FASTENER THE HEAD OF WHICH IS USUALLY FLAT WITH A PERIPHERY NOT CONCENTRIC TO THE BOLT SHANK. THE HEAD IS NOT DESIGNED FOR WRENCHING. IT MAY HAVE A DRIVE FEATURE LOCATED AT THE THREADED END, WHICH CAN BE USED TO ROTATE THE SCREW AND ECCENTRIC HEAD INTO A LOCKING POSITION TO SECURE A FLANGED OR GROOVE COMPONENT.
|
Manufacturer Information:
| 10115834 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 181841-1 | 71791 | CURTISS-WRIGHT CONTROLS, INC. |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | FASTENER LENGTH | 0.810 INCHES NOMINAL | | MATERIAL | STEEL COMP 4130 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OR | | AMS 6370 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 25.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM OVERALL | | HEAD STYLE | FLAT CHAMFER | | HEAD DIAMETER | 0.373 INCHES MINIMUM AND | | 0.374 INCHES MAXIMUM | | HEAD HEIGHT | 0.180 INCHES NOMINAL | | DISTANCE FROM CENTER OF HEAD TO CENTER OF SHANK | 0.057 INCHES MINIMUM AND | | 0.067 INCHES MAXIMUM | | INTERNAL DRIVE STYLE | SLOT | | SPECIAL FEATURES | END SLOTTED 0.030 IN. WIDE BY 0.040 IN. DEEP |
|
|