|
|
|
National Stock Number:
5306-01-118-4898
Federal Supply Class:
5306
National Item Identification Number:
011184898
Description:
BOLT,SHEAR
Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
| 120978-3-10 | 80539 | SPS TECHNOLOGIES, LLC | | 596-3-10 | 06725 | SPS TECHNOLOGIES, LLC | | C7521-3-10 | 06710 | VALLEY-TODECO, INC. | | AIC596-3-10 | 06725 | SPS TECHNOLOGIES, LLC | | C7521-3-10 | 56878 | SPS TECHNOLOGIES, LLC | | C7521-3-10 | 81755 | LOCKHEED MARTIN CORPORATION | | VS3133-3-10 | 06950 | HOWMET GLOBAL FASTENING SYSTEMS INC | | SF118-3-10 | 0K6Z0 | SATURN FASTENERS INC | | H411-3-10 | 17446 | HUCK INTERNATIONAL, INC | | PBF7521-3-10 | 27624 | SPS TECHNOLOGIES LLC | | VS3133-3-10 | 70236 | TACTAIR FLUID CONTROLS INC | | VS3133-3-10 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | C7521-3-10 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.190 INCHES | | THREAD QUANTITY PER INCH | 32 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.298 INCHES MINIMUM AND | | 0.348 INCHES MAXIMUM | | FASTENER LENGTH | 0.933 INCHES MINIMUM AND | | 0.963 INCHES MAXIMUM | | MATERIAL | STEEL COMP H11 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS-6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | NAS672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL | | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH | | HEAD STYLE | SPLINE DRIVE SHEAR HEAD | | HEAD HEIGHT | 0.140 INCHES NOMINAL | | HEAD MINOR DIAMETER | 0.383 INCHES MINIMUM AND | | 0.389 INCHES MAXIMUM | | GRIP LENGTH | 0.615 INCHES MINIMUM AND | | 0.635 INCHES MAXIMUM | | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND | | 0.1894 INCHES MAXIMUM | | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD | | 32.0 MICROINCHES GRIP | | 32.0 MICROINCHES THREADS |
|
|