5306-01-117-4186, BOLT,MACHINE

National Stock Number:
5306-01-117-4186

Federal Supply Class:
5306

National Item Identification Number:
011174186

Description:
BOLT,MACHINE

Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.

Manufacturer Information:

2630360-5	80064	NAVAL SHIP SYSTEMS COMMAND
2630360-5	A9271	GORIZIANE GROUP SPA
L34976P005	07482	GENERAL ELECTRIC COMPANY
L34976P305	56878	SPS TECHNOLOGIES, LLC
5306PL0639344	9009H	INSPEKTORAT WSPARCIA SIL ZBROJNYCH
T1227-P005	D9182	ZF INDUSTRIEANTRIEBE WITTEN GMBH

Techincal Specification:

FASTENER LENGTH	0.594 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
FEATURES PROVIDED	FINISHED HEAD
HARDNESS RATING	80.0 ROCKWELL B MINIMUM OVERALL
HEAD HEIGHT	0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM
HEAD STYLE	HEXAGON
LOCKING FEATURE	PATCH OR STRIP THREADS
MATERIAL	STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385 OVERALL
MINIMUM TENSILE STRENGTH	80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH	30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.250 INCHES
WIDTH BETWEEN FLATS	0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	2A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.469 INCHES MINIMUM AND 0.625 INCHES MAXIMUM
THREAD QUANTITY PER INCH	20
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL COARSE (UNC)

Click here to Register for Free 30-day Trial