5306-01-064-7458, BOLT,SHEAR

National Stock Number:
5306-01-064-7458

Federal Supply Class:
5306

National Item Identification Number:
010647458

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

5J-4773	HD208	PON EQUIPMENT B.V.
5J4773	11083	CATERPILLAR INC
F2619-000797	SZ003	FMV, SWEDISH DEFENCE MATERIEL ADMINISTRATION

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	1.914 INCHES MINIMUM AND 1.964 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH	2.500 INCHES NOMINAL
FEATURES PROVIDED	FINISHED HEAD
GRIP DIAMETER	0.6230 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM
GRIP LENGTH	1.678 INCHES MINIMUM AND 1.698 INCHES MAXIMUM
HARDNESS RATING	36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.312 INCHES MINIMUM AND 0.327 INCHES MAXIMUM
HEAD STYLE	HEXAGON
MATERIAL	STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 8735 OR STEEL COMP 6150 OVERALL
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.750 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE
WIDTH BETWEEN FLATS	0.928 INCHES MINIMUM AND 0.940 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM AND CHROMATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.475 INCHES MINIMUM AND 0.525 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)
THREAD QUANTITY PER INCH	18

Click here to Register for Free 30-day Trial