|
|
|
National Stock Number:
5306-01-050-4199
Federal Supply Class:
5306
National Item Identification Number:
010504199
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 50-047-10-29 | 56878 | SPS TECHNOLOGIES, LLC | | 50-047-10-29 | 80539 | SPS TECHNOLOGIES, LLC | | 50-047-10-29 | 97499 | BELL TEXTRON INC | | 50-047-10-29 97499 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| FASTENER LENGTH | 2.887 INCHES MINIMUM AND 2.907 INCHES MAXIMUM | | GRIP DIAMETER | 0.6230 INCHES MINIMUM AND 0.6240 INCHES MAXIMUM | | GRIP LENGTH | 1.765 INCHES MINIMUM AND 1.859 INCHES MAXIMUM | | HEAD HEIGHT | 0.312 INCHES MINIMUM AND 0.327 INCHES MAXIMUM | | HEAD STYLE | UNDERCUT HEXAGON | | NOMINAL THREAD DIAMETER | 0.625 INCHES | | SPECIAL FEATURES | RETAINING RING ON SHANK | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.875 INCHES MINIMUM AND 1.004 INCHES MAXIMUM | | THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) | | THREAD QUANTITY PER INCH | 18 | | WIDTH BETWEEN FLATS | 0.928 INCHES MINIMUM AND 0.940 INCHES MAXIMUM |
|
|