|
|
|
National Stock Number:
5306-01-005-4389
Federal Supply Class:
5306
National Item Identification Number:
010054389
Description:
BOLT,MACHINE
Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.
|
Manufacturer Information:
| AN8C14A | 81352 | AIR FORCE-NAVY AERONAUTICAL SPECIFICATIONS PROMULGATED BY AERONAUTICAL STANDARDS GROUP |
|
Techincal Specification:
| THREAD DIRECTION | RIGHT-HAND | | FASTENER LENGTH | 1.578 INCHES MINIMUM AND | | 1.625 INCHES MAXIMUM | | MATERIAL | STEEL COMP 431 OVERALL | | THREAD LENGTH | 0.750 INCHES MINIMUM AND | | 0.829 INCHES MAXIMUM | | HEAD STYLE | HEXAGON | | THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD DIAMETER | 0.500 INCHES | | THREAD QUANTITY PER INCH | 20 | | THREAD CLASS | 3A | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-18732 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM OVERALL | | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH | | HEAD HEIGHT | 0.265 INCHES MINIMUM AND | | 0.297 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.740 INCHES MINIMUM AND | | 0.752 INCHES MAXIMUM | | GRIP LENGTH | 0.796 INCHES MINIMUM AND | | 0.828 INCHES MAXIMUM | | FEATURES PROVIDED | FINISHED HEAD | | TEST DATA DOCUMENT | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | SPECIAL TEST FEATURES | SPECIAL QUALITY CONTROL TESTING | | DEPARTURE FROM CITED DESIGNATOR | AS MOD BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 81352 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | AN8C14A |
|
|