|
|
|
National Stock Number:
5306-00-922-1487
Federal Supply Class:
5306
National Item Identification Number:
009221487
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| A51M42522-13 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | A51M42522-13 | 61174 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | A51M42522-13 | 79RG9 | NORTHROP GRUMMAN SYSTEMS CORPORATION |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.375 INCHES | | THREAD QUANTITY PER INCH | 24 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.406 INCHES MAXIMUM | | FASTENER LENGTH | 2.223 INCHES NOMINAL | | MATERIAL | STEEL OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | HARDNESS RATING | 46.0 ROCKWELL C MINIMUM AND | | 49.0 ROCKWELL C MAXIMUM OVERALL | | HEAD STYLE | HEXAGON | | HEAD HEIGHT | 0.100 INCHES NOMINAL | | WIDTH BETWEEN FLATS | 0.553 INCHES MINIMUM AND | | 0.564 INCHES MAXIMUM | | GRIP LENGTH | 1.817 INCHES NOMINAL | | GRIP DIAMETER | 0.3725 INCHES MINIMUM AND | | 0.3731 INCHES MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES GRIP | | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 2.122 INCHES NOMINAL FIRST HOLE | | SHANK UNTHREADED HOLE DIAMETER | 0.075 INCHES MINIMUM AND | | 0.080 INCHES MAXIMUM FIRST HOLE | | TEST DATA DOCUMENT | 81349-MIL-I-6868 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 61174 | | DESIGN CONTROL REFERENCE | A51M42522-13 |
|
|