|
|
|
National Stock Number:
5306-00-898-9580
Federal Supply Class:
5306
National Item Identification Number:
008989580
Description:
BOLT,SHEAR
Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.
|
Manufacturer Information:
| AIC260-10-49 | 06725 | SPS TECHNOLOGIES, LLC | | BM55156-10-49 | 17446 | HUCK INTERNATIONAL, INC | | EWSB26-10-49 | 56878 | SPS TECHNOLOGIES, LLC | | EWSB26-10-49 | 80539 | SPS TECHNOLOGIES, LLC | | VS2106-10S49 | 92215 | HOWMET GLOBAL FASTENING SYSTEMS INC | | BM55156-10-49 | 97928 | HUCK INTL INC |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.625 INCHES | | THREAD QUANTITY PER INCH | 18 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.717 INCHES MINIMUM | | FASTENER LENGTH | 3.780 INCHES NOMINAL | | MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | SPS-M-107,FSCM 03680 MFR REF SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-8837 TY 1 CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 51.0 ROCKWELL C MINIMUM AND | | 54.0 ROCKWELL C MAXIMUM OVERALL | | MINIMUM TENSILE STRENGTH | 260000 POUNDS PER SQUARE INCH | | HEAD STYLE | DOUBLE HEXAGON | | HEAD HEIGHT | 0.350 INCHES NOMINAL | | WIDTH BETWEEN FLATS | 0.928 INCHES MINIMUM AND | | 0.940 INCHES MAXIMUM | | GRIP LENGTH | 3.062 INCHES NOMINAL | | GRIP DIAMETER | 0.6230 INCHES MINIMUM AND | | 0.6240 INCHES MAXIMUM | | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 3.575 INCHES NOMINAL FIRST HOLE | | SHANK UNTHREADED HOLE DIAMETER | 0.141 INCHES NOMINAL FIRST HOLE | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
|
|