5306-00-851-5707 BOLT,MACHINE Index 5910-00-851-5710 CAPACITOR,FIXED,MICA DIELECTRIC

National Stock Number:
5306-00-851-5709

Federal Supply Class:
5306

National Item Identification Number:
008515709

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.


Manufacturer Information:
BACB30LC12-40D81205THE BOEING COMPANY


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER3.289 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH3.526 INCHES MINIMUM AND 3.546 INCHES MAXIMUM
GRIP DIAMETER0.1410 INCHES MINIMUM AND 0.1510 INCHES MAXIMUM
GRIP LENGTH2.490 INCHES MINIMUM AND 2.510 INCHES MAXIMUM
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT0.375 INCHES MINIMUM AND 0.490 INCHES MAXIMUM
HEAD STYLEDISHED HEXAGON
MATERIALSTEEL OVERALL
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.750 INCHES
SHANK UNTHREADED HOLE DIAMETER0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE
SPECIAL FEATURESMUST MEET STRICT INSPECTION REQUIREMENT
SPECIFICATION/STANDARD DATA81205-BACB30LC MANUFACTURERS STANDARD
WIDTH BETWEEN FLATS1.052 INCHES MINIMUM AND 1.064 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY2 CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH1.041 INCHES MINIMUM
THREAD QUANTITY PER INCH16
THREAD SERIES DESIGNATORUNF


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us