|
|
|
National Stock Number:
5306-00-828-9767
Federal Supply Class:
5306
National Item Identification Number:
008289767
Description:
BOLT,MACHINE
Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.
|
Manufacturer Information:
| 416074-1 | 80020 | NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION CODE 4.8.8.0.0.B BLDG 148-2 |
|
Techincal Specification:
| THREAD DIRECTION | RIGHT-HAND | | FASTENER LENGTH | 3.812 INCHES NOMINAL | | MATERIAL | STEEL COMP 4140 OR | | STEEL COMP 8740 OR | | STEEL COMP 8735 OR | | STEEL COMP 4130 OVERALL | | THREAD LENGTH | 0.921 INCHES MINIMUM AND | | 0.953 INCHES MAXIMUM | | HEAD STYLE | HEXAGON | | THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD DIAMETER | 1.250 INCHES | | THREAD QUANTITY PER INCH | 12 | | THREAD CLASS | 3A | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR | | MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR | | MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OR | | MIL-S-6758 MIL SPEC 4TH MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY2 CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM OVERALL | | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH | | HEAD HEIGHT | 0.640 INCHES MINIMUM AND | | 0.672 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 1.812 INCHES NOMINAL | | GRIP LENGTH | 2.859 INCHES MINIMUM AND | | 2.891 INCHES MAXIMUM | | FEATURES PROVIDED | FINISHED HEAD | | SPECIAL FEATURES | 0.172 IN. RADIUS ON HEX FLAT PARALLEL TO LONGDITUAL AXIS | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 80020 | | DESIGN CONTROL REFERENCE | 416074-1 |
|
|