5306-00-782-0765 BOLT,CLOSE TOLERANCE Index 5315-00-782-0767 PIN,STRAIGHT,HEADED

National Stock Number:
5306-00-782-0766

Federal Supply Class:
5306

National Item Identification Number:
007820766

Description:
BOLT,MACHINE

Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.


Manufacturer Information:
5008M86P206710VALLEY-TODECO, INC.
5008M86P206725SPS TECHNOLOGIES, LLC
5008M86P207482GENERAL ELECTRIC COMPANY
5008M86P224446GENERAL ELECTRIC COMPANY
5008M86P256878SPS TECHNOLOGIES, LLC
5008M86P292215HOWMET GLOBAL FASTENING SYSTEMS INC
5008M86P295266OECO, LLC
5008M86P2C4293ALCOA FASTENING SYSTEMS FAIRCHILDFASTENERS EUROPE - VSD GMBH


Techincal Specification:
EXTENDED WASHER DIAMETER0.575 INCHES MINIMUM AND 0.585 INCHES MAXIMUM
EXTENDED WASHER THICKNESS0.040 INCHES MINIMUM AND 0.060 INCHES MAXIMUM
FASTENER LENGTH1.033 INCHES MINIMUM AND 1.063 INCHES MAXIMUM
FEATURES PROVIDEDFINISHED HEAD
GRIP LENGTH0.344 INCHES MINIMUM AND 0.364 INCHES MAXIMUM
HARDNESS RATING51.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT0.309 INCHES MINIMUM AND 0.329 INCHES MAXIMUM
HEAD STYLEDOUBLE HEXAGON W/HOLE
HOLE CONFIGURATION STYLEROUND
HOLE DIAMETER0.055 INCHES NOMINAL
HOLE QUANTITY4
HOLE TYPEDRILLED
MATERIAL DOCUMENT AND CLASSIFICATIONAMS6485 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP H11 OVERALL
MINIMUM TENSILE STRENGTH16000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.312 INCHES
SURFACE FINISH32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH32.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONAMS 2416 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.503 INCHES MINIMUM AND 0.553 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNIFIED NATIONAL JOINT FINE (UNJF)
THREAD QUANTITY PER INCH24
WIDTH BETWEEN FLATS0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us