5306-00-660-2380, BOLT,SHEAR

National Stock Number:
5306-00-660-2380

Federal Supply Class:
5306

National Item Identification Number:
006602380

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

2356379-33-5	18355	THE BOEING COMPANY
2356379-33-5	88277	THE BOEING COMPANY
S2356379-33-5	18355	THE BOEING COMPANY
S2356379-33-5	88277	THE BOEING COMPANY

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	3.328 INCHES MINIMUM AND 3.360 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH	3.578 INCHES MINIMUM AND 3.625 INCHES MAXIMUM
GRIP DIAMETER	0.5611 INCHES MINIMUM AND 0.5616 INCHES MAXIMUM
GRIP LENGTH	2.672 INCHES MINIMUM AND 2.704 INCHES MAXIMUM
HEAD HEIGHT	0.296 INCHES MINIMUM AND 0.328 INCHES MAXIMUM
HEAD STYLE	HEXAGON
MATERIAL	STEEL COMP 8735 OVERALL
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.562 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.141 INCHES NOMINAL FIRST HOLE
SINGLE SHEAR STRENGTH	23600 POUNDS PER SQUARE INCH
WIDTH BETWEEN FLATS	0.865 INCHES MINIMUM AND 0.877 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE HEAD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE THREADS
SURFACE TREATMENT	CADMIUM HEAD
SURFACE TREATMENT	CADMIUM THREADS
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.874 INCHES MINIMUM AND 0.953 INCHES MAXIMUM
THREAD QUANTITY PER INCH	18
THREAD SERIES DESIGNATOR	UNF

Click here to Register for Free 30-day Trial