|
|
|
National Stock Number:
5306-00-584-5260
Federal Supply Class:
5306
National Item Identification Number:
005845260
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| AN177-5A | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE | | NASM6812 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD DIAMETER | 0.437 INCHES | | THREAD QUANTITY PER INCH | 20 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.625 INCHES MINIMUM AND | | 0.704 INCHES MAXIMUM | | FASTENER LENGTH | 0.703 INCHES MINIMUM AND | | 0.750 INCHES MAXIMUM | | MATERIAL | STEEL COMP 8740 OR | | STEEL COMP 8630 OR | | STEEL COMP 8735 OR | | STEEL COMP 4140 OR | | STEEL COMP 4130 OR | | STEEL COMP 4037 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6049 MIL SPEC 1ST MATERIAL RESPONSE OR | | MIL-S-6050 MIL SPEC 2ND MATERIAL RESPONSE OR | | MIL-S-6098 MIL SPEC 3RD MATERIAL RESPONSE OR | | MIL-S-5626 MIL SPEC 4TH MATERIAL RESPONSE OR | | MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OR | | AMS 6300 ASSN STD 6TH MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND | | 32.0 ROCKWELL C MAXIMUM OVERALL | | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH | | HEAD STYLE | HEXAGON | | HEAD HEIGHT | 0.234 INCHES MINIMUM AND | | 0.266 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.615 INCHES MINIMUM AND | | 0.627 INCHES MAXIMUM | | GRIP LENGTH | 0.046 INCHES MINIMUM AND | | 0.078 INCHES MAXIMUM | | GRIP DIAMETER | 0.4362 INCHES MINIMUM AND | | 0.4367 INCHES MAXIMUM | | SURFACE FINISH | 63.0 MICROINCHES BEARING SURFACE OF HEAD | | 63.0 MICROINCHES GRIP |
|
|