5306-00-501-9153, BOLT,SHOULDER

5905-00-501-9147 RESISTOR,FIXED,WIRE WOUND

5905-00-501-9154 RESISTOR,FIXED,WIRE WOUND,NONIND

National Stock Number:
5306-00-501-9153

Federal Supply Class:
5306

National Item Identification Number:
005019153

Description:
BOLT,SHOULDER

Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No. 10 (0.190 IN.) (5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is not designed to be held or driven with an inserted drivers. A locking feature may be incorporated in the design of the head or threads. For items with a thread diameter smaller than No. 10 (0.190 IN.) (5 mm) and those items with an inserted drive head, use SCREW, SHOULDER. For items which are No. 10 (0.190 IN.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use BOLT, EXTERNALLY RELIEVED BODY. Excludes THUMBSCREW.

Manufacturer Information:

A51P60725-11	0BVP9	CAPY MACHINE SHOP INC.
A51P60725-11	26512	NORTHROP GRUMMAN SYSTEMS CORPORATION
A51P60725-11	61174	NORTHROP GRUMMAN SYSTEMS CORPORATION
A51P60725-11	79RG9	NORTHROP GRUMMAN SYSTEMS CORPORATION

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	2.248 INCHES NOMINAL FIRST HOLE
BOTTOM COUNTERSINK DIAMETER	0.910 INCHES NOMINAL
COUNTERSINK ANGLE	90.0 DEGREES NOMINAL
FASTENER LENGTH	2.440 INCHES NOMINAL
HARDNESS RATING	38.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.280 INCHES MINIMUM AND 0.295 INCHES MAXIMUM
HEAD STYLE	HEXAGON COUNTERSUNK UNDERCUT
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5643 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP 630 OVERALL
NOMINAL THREAD DIAMETER	0.625 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.141 INCHES MINIMUM AND 0.151 INCHES MAXIMUM FIRST HOLE
SHOULDER DIAMETER	0.748 INCHES MINIMUM AND 0.749 INCHES MAXIMUM FIRST SHOULDER
SHOULDER SHAPE	ROUND FIRST SHOULDER
SHOULDER LENGTH	1.810 INCHES NOMINAL FIRST SHOULDER
WIDTH BETWEEN FLATS	1.052 INCHES MINIMUM AND 1.064 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.630 INCHES NOMINAL
THREAD QUANTITY PER INCH	18
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)

Click here to Register for Free 30-day Trial