5306-00-487-4763, BOLT,SHEAR

National Stock Number:
5306-00-487-4763

Federal Supply Class:
5306

National Item Identification Number:
004874763

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

AIC926-5-10	06725	SPS TECHNOLOGIES, LLC
BACB30EK5-10C	81205	THE BOEING COMPANY
BM90156-5-10	17446	HUCK INTERNATIONAL, INC
EWSB926-5-10	56878	SPS TECHNOLOGIES, LLC
C878-5-10	81755	LOCKHEED MARTIN CORPORATION
BM90156-5-10	97928	HUCK INTL INC
GB511A5A10	26512	NORTHROP GRUMMAN SYSTEMS CORPORATION
EWSB926-5-10	80539	SPS TECHNOLOGIES, LLC
VS2106C5S10	92215	HOWMET GLOBAL FASTENING SYSTEMS INC

Techincal Specification:

DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER	0.855 INCHES MINIMUM AND 0.875 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH	0.968 INCHES MINIMUM AND 1.015 INCHES MAXIMUM
GRIP LENGTH	0.615 INCHES MINIMUM AND 0.635 INCHES MAXIMUM
GRIP DIAMETER	0.3108 INCHES MINIMUM AND 0.3117 INCHES MAXIMUM
HARDNESS RATING	51.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.177 INCHES MINIMUM AND 0.197 INCHES MAXIMUM
HEAD STYLE	DOUBLE HEXAGON
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6485 ASSN STD SINGLE MATERIAL RESPONSE OR AMS6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP H11 OVERALL
MINIMUM TENSILE STRENGTH	260000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.312 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.076 INCHES NOMINAL FIRST HOLE
SPECIFICATION/STANDARD DATA	81205-BACB30EK MANUFACTURERS STANDARD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	AMS 2416 ASSN STD ALL TREATMENT RESPONSES OVERALL
SURFACE TREATMENT
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.333 INCHES MINIMUM AND 0.400 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)
THREAD QUANTITY PER INCH	24
WIDTH BETWEEN FLATS	0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM

Click here to Register for Free 30-day Trial