5306-00-470-8164, BOLT,SHEAR

National Stock Number:
5306-00-470-8164

Federal Supply Class:
5306

National Item Identification Number:
004708164

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

AIC220EL3H6	06725	SPS TECHNOLOGIES, LLC
C083-3H6	81755	LOCKHEED MARTIN CORPORATION
VS2201F3H6	06950	HOWMET GLOBAL FASTENING SYSTEMS INC
LWB22-3H6	56878	SPS TECHNOLOGIES, LLC
LWB22-3H6	73197	HI-SHEAR CORPORATION
LWB22-3H6	80539	SPS TECHNOLOGIES, LLC
VS2201F3H6	92215	HOWMET GLOBAL FASTENING SYSTEMS INC

Techincal Specification:

EXTENDED WASHER DIAMETER	0.340 INCHES MINIMUM AND 0.350 INCHES MAXIMUM
EXTENDED WASHER THICKNESS	0.054 INCHES MINIMUM AND 0.074 INCHES MAXIMUM
FASTENER LENGTH	0.694 INCHES MINIMUM AND 0.724 INCHES MAXIMUM
GRIP LENGTH	0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
GRIP DIAMETER	0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM
HARDNESS RATING	46.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.265 INCHES MINIMUM AND 0.275 INCHES MAXIMUM
HEAD STYLE	DOUBLE HEXAGON W/HOLE
HOLE CONFIGURATION STYLE	ROUND LONGITUDINAL HOLE
HOLE DIAMETER	0.037 INCHES NOMINAL
HOLE TYPE	DRILLED
HOLE QUANTITY	4
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 6485 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 6487 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	STEEL COMP H11 OVERALL
MINIMUM TENSILE STRENGTH	220000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.190 INCHES
WIDTH BETWEEN FLATS	0.243 INCHES MINIMUM AND 0.251 INCHES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	NAS 672 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	CADMIUM OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.309 INCHES MINIMUM AND 0.359 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)
THREAD QUANTITY PER INCH	32

Click here to Register for Free 30-day Trial