5306-00-460-8545, BOLT,CLOSE TOLERANCE

National Stock Number:
5306-00-460-8545

Federal Supply Class:
5306

National Item Identification Number:
004608545

Description:
BOLT,CLOSE TOLERANCE

Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.

Manufacturer Information:

106467-3-14	80539	SPS TECHNOLOGIES, LLC
AS194-3-14	84256	AVIBANK MFG., INC.
CA4510-3-14	29372	HOWMET GLOBAL FASTENING SYSTEMS INC.
MS27576-3-14	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS27576-3-14	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

FASTENER LENGTH	1.247 INCHES MINIMUM AND 1.257 INCHES MAXIMUM
GRIP DIAMETER	0.1885 INCHES MINIMUM AND 0.1894 INCHES MAXIMUM
GRIP LENGTH	0.875 INCHES MINIMUM AND 0.891 INCHES MAXIMUM
HARDNESS RATING	35.0 ROCKWELL C MINIMUM AND 41.0 ROCKWELL C MAXIMUM FASTENER
HEAD HEIGHT	0.095 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
HEAD STYLE	DISHED HEXAGON
LOCKING FEATURE	RETAINER GRIP
MATERIAL DOCUMENT AND CLASSIFICATION	MAS 5643 ASSN STD 1ST MATERIAL RESPONSE OR QQ-S-763 FED SPEC 2ND MATERIAL RESPONSE LOCKING FEATURE
MATERIAL	STEEL COMP 630 OR STEEL COMP 440C LOCKING FEATURE
MATERIAL	STEEL COMP E4340 OR STEEL COMP 4140 OR STEEL COMP 8740 OR STEEL COMP 4130 OR STEEL COMP 6150 FASTENER
MINIMUM TENSILE STRENGTH	95000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.190 INCHES
SHANK UNTHREADED HOLE DIAMETER	0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM FIRST HOLE
WIDTH BETWEEN FLATS	0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM
SURFACE FINISH	63.0 MICROINCHES GRIP
SURFACE FINISH	63.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE LOCKING FEATURE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-416,TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
SURFACE TREATMENT	CADMIUM AND CHROMATE FASTENER
SURFACE TREATMENT	PASSIVATE LOCKING FEATURE
THREAD LENGTH	0.236 INCHES MINIMUM AND 0.318 INCHES MAXIMUM
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD QUANTITY PER INCH	32
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)

Click here to Register for Free 30-day Trial