5306-00-432-6117, BOLT,MACHINE

National Stock Number:
5306-00-432-6117

Federal Supply Class:
5306

National Item Identification Number:
004326117

Description:
BOLT,MACHINE

Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.

Manufacturer Information:

MS9716-07	05047	THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS
MS9716-07	33436	BETA ENGINEERING, INC.
SAE AS9716	05047	THE AMERICAN SOCIETY OF MECHANICAL ENGINEERS
MS9716-07	80205	NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE
MS9716-07	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

EXTENDED WASHER DIAMETER	0.500 INCHES NOMINAL
EXTENDED WASHER THICKNESS	0.070 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
FASTENER LENGTH	0.688 INCHES NOMINAL
FEATURES PROVIDED	FINISHED HEAD
GRIP LENGTH	0.088 INCHES MINIMUM AND 0.108 INCHES MAXIMUM
HARDNESS RATING	34.0 ROCKWELL C MINIMUM AND 44.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT	0.338 INCHES NOMINAL
HEAD STYLE	DOUBLE HEXAGON W/HOLE
HOLE CONFIGURATION STYLE	HEXAGON FLATS
HOLE DIAMETER	0.070 INCHES NOMINAL
HOLE QUANTITY	4
HOLE TYPE	DRILLED
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5708 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	NICKEL ALLOY OVERALL
MINIMUM YIELD STRENGTH	115000 POUNDS PER SQUARE INCH
MINIMUM TENSILE STRENGTH	175000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.312 INCHES
PRECIOUS MATERIAL	SILVER
WIDTH BETWEEN FLATS	0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE FINISH	32.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	AMS 2410 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	SILVER OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.580 INCHES MINIMUM AND 0.600 INCHES MAXIMUM
THREAD QUANTITY PER INCH	24
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)

Click here to Register for Free 30-day Trial