| CRITICALITY CODE JUSTIFICATION | AAWC |
| DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | 0.730 INCHES MINIMUM AND 0.740 INCHES MAXIMUM |
| DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF SECOND DIAMETER | 1.070 INCHES MINIMUM AND 1.080 INCHES MAXIMUM |
| EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 2 |
| FASTENER LENGTH | 1.640 INCHES MINIMUM AND 1.650 INCHES MAXIMUM |
| FIRST DIAMETER FROM HEAD | 0.5095 INCHES MINIMUM AND 0.5100 INCHES MAXIMUM |
| HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND 36.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD DIAMETER | 0.880 INCHES NOMINAL |
| HEAD HEIGHT | 0.450 INCHES MINIMUM AND 0.460 INCHES MAXIMUM |
| HEAD STYLE | ROUND W/WRENCH FLATS CHAMFERED |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 8740 OVERALL |
| NOMINAL THREAD DIAMETER | 0.438 INCHES |
| SECOND DIAMETER FROM HEAD | 0.360 INCHES NOMINAL |
| SPECIAL FEATURES | OUTER EDGE OF ONE WRENCH FLAT CHAMFERED 45 DEG TO A DEPTH OF 0.280 IN. MIN,0.300 IN. MAX |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL |
| TEST DATA DOCUMENT | 81343-AMS 2640 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.560 INCHES MINIMUM AND 0.580 INCHES MAXIMUM |
| THREAD QUANTITY PER INCH | 20 |
| THREAD SERIES DESIGNATOR | UNF |
| WIDTH BETWEEN FLATS | 0.530 INCHES NOMINAL |