5306-00-406-5603, BOLT,SHEAR

National Stock Number:
5306-00-406-5603

Federal Supply Class:
5306

National Item Identification Number:
004065603

Description:
BOLT,SHEAR

Detail:
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See BOLT, MACHINE and BOLT, CLEVIS.

Manufacturer Information:

VAL26001-5-42

06710

VALLEY-TODECO, INC.

Techincal Specification:

EXTENDED WASHER DIAMETER	0.521 INCHES MINIMUM AND 0.531 INCHES MAXIMUM
EXTENDED WASHER THICKNESS	0.072 INCHES MINIMUM AND 0.092 INCHES MAXIMUM
FASTENER LENGTH	3.110 INCHES MINIMUM AND 3.157 INCHES MAXIMUM
GRIP DIAMETER	0.3115 INCHES MINIMUM AND 0.3120 INCHES MAXIMUM
GRIP LENGTH	2.615 INCHES MINIMUM AND 2.635 INCHES MAXIMUM
HEAD HEIGHT	0.338 INCHES MINIMUM AND 0.358 INCHES MAXIMUM
HEAD STYLE	DOUBLE HEXAGON W/HOLE
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	NICKEL ALLOY 718 OVERALL
MINIMUM TENSILE STRENGTH	185000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER	0.312 INCHES
SPECIFICATION/STANDARD DATA	06710-VAL26001 MANUFACTURERS STANDARD
WIDTH BETWEEN FLATS	0.368 INCHES MINIMUM AND 0.377 INCHES MAXIMUM
SURFACE FINISH	32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH	32.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	PASSIVATE OVERALL
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.475 INCHES MINIMUM AND 0.542 INCHES MAXIMUM
THREAD QUANTITY PER INCH	24
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)

Click here to Register for Free 30-day Trial