5306-00-369-5848, BOLT,MACHINE

National Stock Number:
5306-00-369-5848

Federal Supply Class:
5306

National Item Identification Number:
003695848

Description:
BOLT,MACHINE

Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.

Manufacturer Information:

5306PL1495140	9009H	INSPEKTORAT WSPARCIA SIL ZBROJNYCH
AT2015-027	52661	RTX CORPORATION
ST2015-016	0UCY9	M.S. AEROSPACE INC.
ST2015-016	2T498	MORTON GRINDING, INC
ST2015-016	4GP55	ACUFAST AIRCRAFT PRODUCTS
ST2015-016	52661	RTX CORPORATION
ST2015-024	4GP55	ACUFAST AIRCRAFT PRODUCTS
ST2015-016	77445	RTX CORPORATION

Techincal Specification:

CRITICALITY CODE JUSTIFICATION	FEAT
EXTENDED WASHER DIAMETER	0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
EXTENDED WASHER THICKNESS	0.040 INCHES MINIMUM
FASTENER LENGTH	0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
FEATURES PROVIDED	FINISHED HEAD
GRIP LENGTH	0.025 INCHES MINIMUM AND 0.092 INCHES MAXIMUM
HEAD HEIGHT	0.248 INCHES MINIMUM AND 0.268 INCHES MAXIMUM
HEAD STYLE	DOUBLE HEXAGON W/HOLE
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 4967 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL	TITANIUM ALLOY OVERALL
NOMINAL THREAD DIAMETER	0.190 INCHES
SPECIAL FEATURES	BOLT;USED IN MANY PLACES IN THE ENGINE MOSTLY AS CABLE HARNESS MOUNT, MADE OF AMS 7461, TI ALLOY, 0.778 INCH LENGTH, .385 INCH DIAMETER. USED ON 220 AND 229 ENGINE. FAILURE OF THIS BOLT WOULD NOT CAUSE AN ENGINE SHUT DOWN OR CATASTROPHIC FAILURE. FAILURE WOULD RESULT IN MAINTENANCE TO REMOVE AND REPLACE BROKEN BOLT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	PWA 37-1,FSCM 77445 MFR REF SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENT	ANODIZE OVERALL
THREAD CLASS	3A
THREAD DIRECTION	RIGHT-HAND
THREAD LENGTH	0.398 INCHES MINIMUM AND 0.485 INCHES MAXIMUM
THREAD SERIES DESIGNATOR	UNIFIED NATIONAL JOINT FINE (UNJF)
THREAD QUANTITY PER INCH	32
WIDTH BETWEEN FLATS	0.250 INCHES NOMINAL

Click here to Register for Free 30-day Trial