|
|
|
National Stock Number:
5306-00-332-9991
Federal Supply Class:
5306
National Item Identification Number:
003329991
Description:
BOLT,SHOULDER
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No. 10 (0.190 IN.) (5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is not designed to be held or driven with an inserted drivers. A locking feature may be incorporated in the design of the head or threads. For items with a thread diameter smaller than No. 10 (0.190 IN.) (5 mm) and those items with an inserted drive head, use SCREW, SHOULDER. For items which are No. 10 (0.190 IN.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use BOLT, EXTERNALLY RELIEVED BODY. Excludes THUMBSCREW.
|
Manufacturer Information:
| 9146-43 | 13002 | GOODRICH CORPORATION | | 9146-43 | 6K4C8 | GOODRICH CORPORATION |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD DIAMETER | 0.250 INCHES | | THREAD QUANTITY PER INCH | 28 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.380 INCHES MINIMUM | | FASTENER LENGTH | 1.660 INCHES NOMINAL | | MATERIAL | STEEL COMP 4130 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 1 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HARDNESS RATING | 27.0 ROCKWELL C MINIMUM AND | | 34.0 ROCKWELL C MAXIMUM OVERALL | | MINIMUM YIELD STRENGTH | 100000 POUNDS PER SQUARE INCH | | HEAD STYLE | HEXAGON | | HEAD HEIGHT | 0.160 INCHES NOMINAL | | WIDTH BETWEEN FLATS | 0.440 INCHES NOMINAL | | SHOULDER SHAPE | ROUND FIRST SHOULDER | | SHOULDER DIAMETER | 0.281 INCHES MINIMUM AND | | 0.282 INCHES MAXIMUM FIRST SHOULDER | | SHOULDER LENGTH | 1.280 INCHES NOMINAL FIRST SHOULDER | | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.510 INCHES NOMINAL FIRST HOLE | | SHANK UNTHREADED HOLE DIAMETER | 0.075 INCHES MINIMUM AND | | 0.078 INCHES MAXIMUM FIRST HOLE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 13002 | | DESIGN CONTROL REFERENCE | 9146-43 |
|
|