|
|
|
National Stock Number:
5306-00-306-4394
Federal Supply Class:
5306
National Item Identification Number:
003064394
Description:
BOLT,CLOSE TOLERANCE
Detail:
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see BOLT, SHEAR. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see BOLT, MACHINE.
|
Manufacturer Information:
| 3400849-17 | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNF | | NOMINAL THREAD DIAMETER | 0.375 INCHES | | THREAD QUANTITY PER INCH | 24 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.609 INCHES MINIMUM AND | | 0.688 INCHES MAXIMUM | | FASTENER LENGTH | 1.937 INCHES MINIMUM AND | | 1.984 INCHES MAXIMUM | | MATERIAL | STEEL COMP 4140 OR | | STEEL COMP 8740 OR | | STEEL COMP 8630 OR | | STEEL COMP 8735 OR | | STEEL COMP 4130 OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OR | | MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR | | MIL-S-6050 MIL SPEC 3RD MATERIAL RESPONSE OR | | MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OR | | MIL-S-6758 MIL SPEC 5TH MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM AND | | CHROMATE OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL | | HEAD STYLE | HEXAGON | | HEAD HEIGHT | 0.203 INCHES MINIMUM AND | | 0.235 INCHES MAXIMUM | | WIDTH BETWEEN FLATS | 0.553 INCHES MINIMUM AND | | 0.565 INCHES MAXIMUM | | HOLE CONFIGURATION STYLE | HEXAGON FLATS | | HOLE TYPE | DRILLED | | HOLE QUANTITY | 1 | | HOLE DIAMETER | 0.124 INCHES MINIMUM AND | | 0.129 INCHES MAXIMUM | | GRIP LENGTH | 1.296 INCHES MINIMUM AND | | 1.328 INCHES MAXIMUM | | GRIP DIAMETER | 0.3737 INCHES MINIMUM AND | | 0.3742 INCHES MAXIMUM | | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.734 INCHES MINIMUM AND | | 1.766 INCHES MAXIMUM FIRST HOLE | | SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES MINIMUM AND | | 0.116 INCHES MAXIMUM FIRST HOLE |
|
|