5306-00-282-3085 BOLT,MACHINE Index 5306-00-282-3087 BOLT,MACHINE

National Stock Number:
5306-00-282-3086

Federal Supply Class:
5306

National Item Identification Number:
002823086

Description:
BOLT,MACHINE

Detail:
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.


Manufacturer Information:
AN7DD2788044AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
B681281349MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M


Techincal Specification:
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER2.796 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH2.969 INCHES NOMINAL
FEATURES PROVIDEDFINISHED HEAD
GRIP LENGTH2.312 INCHES NOMINAL
HEAD HEIGHT0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM
HEAD STYLEHEXAGON
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-267 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-268 FED SPEC 1ST MATERIAL RESPONSE OR MIL-W-7986 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-W-7986 MIL SPEC 2ND MATERIAL RESPONSE OR MIL-W-7986 MIL SPEC 3RD MATERIAL RESPONSE OR MIL-W-7986 MIL SPEC 4TH MATERIAL RESPONSE OR MIL-W-7986 MIL SPEC 5TH MATERIAL RESPONSE OVERALL
MATERIALALUMINUM ALLOY 2024 OR ALUMINUM ALLOY 1100 OR ALUMINUM ALLOY 2017 OR ALUMINUM ALLOY 2117 OR ALUMINUM ALLOY 5056 OVERALL
MINIMUM TENSILE STRENGTH62000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.438 INCHES
SHANK UNTHREADED HOLE DIAMETER0.106 INCHES NOMINAL FIRST HOLE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-5541 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-A-8625 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
SURFACE TREATMENTOXIDE FILM AND ANODIZE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.657 INCHES MINIMUM
THREAD QUANTITY PER INCH20
THREAD SERIES DESIGNATORUNF
WIDTH BETWEEN FLATS0.615 INCHES MINIMUM AND 0.627 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us