|
|
|
National Stock Number:
5306-00-281-2865
Federal Supply Class:
5306
National Item Identification Number:
002812865
Description:
BOLT,SHOULDER
Detail:
An externally threaded fastener whose threaded portion is of one nominal diameter, No. 10 (0.190 IN.) (5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is not designed to be held or driven with an inserted drivers. A locking feature may be incorporated in the design of the head or threads. For items with a thread diameter smaller than No. 10 (0.190 IN.) (5 mm) and those items with an inserted drive head, use SCREW, SHOULDER. For items which are No. 10 (0.190 IN.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use BOLT, EXTERNALLY RELIEVED BODY. Excludes THUMBSCREW.
|
Manufacturer Information:
| 1292336-101 | 98897 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| THREAD SERIES DESIGNATOR | UNJF | | NOMINAL THREAD DIAMETER | 0.375 INCHES | | THREAD QUANTITY PER INCH | 24 | | THREAD CLASS | 3A | | THREAD DIRECTION | RIGHT-HAND | | THREAD LENGTH | 0.457 INCHES MINIMUM AND | | 0.476 INCHES MAXIMUM | | FASTENER LENGTH | 1.940 INCHES NOMINAL | | MATERIAL | STEEL OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000,COND E4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | CADMIUM OVERALL | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | LCP77-1061,TYPE 2,CL 2,FSCM 36659 MFR REF SINGLE TREATMENT RESPONSE OVERALL | | HEAD STYLE | ROUND W/WRENCH FLATS | | HEAD DIAMETER | 1.125 INCHES NOMINAL | | HEAD HEIGHT | 0.120 INCHES NOMINAL | | WIDTH BETWEEN FLATS | 0.875 INCHES NOMINAL | | SHOULDER SHAPE | ROUND FIRST SHOULDER | | SHOULDER DIAMETER | 0.498 INCHES MINIMUM AND | | 0.499 INCHES MAXIMUM FIRST SHOULDER | | SHOULDER LENGTH | 1.400 INCHES MINIMUM AND | | 1.410 INCHES MAXIMUM FIRST SHOULDER | | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.700 INCHES MINIMUM AND | | 1.710 INCHES MAXIMUM FIRST HOLE | | 1.850 INCHES MINIMUM AND | | 1.860 INCHES MAXIMUM SECOND HOLE | | SHANK UNTHREADED HOLE DIAMETER | 0.105 INCHES MINIMUM AND | | 0.110 INCHES MAXIMUM ALL HOLES | | SPECIAL FEATURES | 2 DRILLED HOLES IN SHANK 90 DEG APART | | TEST DATA DOCUMENT | 36659-LCP72-1076 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 98897 | | DESIGN CONTROL REFERENCE | 1292336-101 |
|
|