|
|
|
National Stock Number:
5306-00-271-4712
Federal Supply Class:
5306
National Item Identification Number:
002714712
Description:
BOLT,EYE
Detail:
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also BOLT, HOOK. Excludes CONNECTOR, ROD END.
|
Manufacturer Information:
| AN44-32 | 80205 | NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | | AN44-32 | 88044 | AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE |
|
Techincal Specification:
| DISTANCE FROM THREADED END TO SHANK HOLE CENTER | 3.156 INCHES MINIMUM AND 3.188 INCHES MAXIMUM FIRST HOLE | | EYE OUTSIDE WIDTH | 0.625 INCHES NOMINAL | | EYE STOCK THICKNESS | 0.183 INCHES MINIMUM AND 0.193 INCHES MAXIMUM | | HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT | | MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH | | NOMINAL THREAD DIAMETER | 0.312 INCHES | | OVERALL LENGTH | 4.234 INCHES NOMINAL | | SHANK UNTHREADED HOLE DIAMETER | 0.066 INCHES MINIMUM AND 0.086 INCHES MAXIMUM FIRST HOLE | | SHANK LENGTH | 3.328 INCHES MINIMUM AND 3.375 INCHES MAXIMUM | | SHOULDER DIAMETER | 0.625 INCHES NOMINAL | | SHOULDER THICKNESS | 0.094 INCHES NOMINAL | | STYLE DESIGNATOR | ROUND, CLOSED W/SHOULDER | | THREAD CLASS | 3A | | THREAD LENGTH | 0.515 INCHES MINIMUM AND 0.562 INCHES MAXIMUM | | THREAD QUANTITY PER INCH | 24 | | THREAD SERIES DESIGNATOR | UNF |
|
|